TL;DR: Smart Security Terminal Board
AndroidSBC supply desk: LPDDR4 and eMMC allocations locked for the X9 board family serving Dortmund, Germany. The WF-X9-05 X9 Android motherboard spans the infrared touch all-in-one for interactive kiosks and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, LVDS output at 1080p with 10-point infrared touch, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Dortmund and Germany importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.
About AndroidSBC and the X9 Android Motherboard Family
The X9 family covers the full span a Dortmund screen network will meet in one refresh cycle: a 1GB plus 8GB entry player for indoor posters, a 2GB plus 16GB interactive tier for query kiosks, and a wide-temperature tier for unattended cabinets that sit outside or on a factory floor. Each production lot is burned in for 72 hours with the panel, the touch frame and the playback loop running, and the serial number is logged against the test record so a Dortmund partner can trace a single board back to its run.
WF-X9-05 Technical Specifications
| Parameter | AndroidSBC WF-X9-05 (infrared touch all-in-one for interactive kiosks) | Industry Average |
|---|---|---|
| Processor | A133 quad-core ARM Cortex-A53 1.6GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | PowerVR GE8300 | Older Mali-400 or basic 2D GPU |
| Memory | 2GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 16GB eMMC | NAND flash 4GB or 8GB on competing boards |
| Display output | LVDS output at 1080p with 10-point infrared touch | Single HDMI 1080p output only |
| Touch support | 10-point infrared touch | Resistive single-touch requiring calibration |
| Video decode | 4K H.265 or H.264 at 30fps plus 1080p multi-format | 1080p decode ceiling on competing boards |
| Operating system | Android 10 | Android 7 or Android 8 on competing boards |
| Interfaces | 4 USB including USB0 OTG, 2 serial ports selectable RS232 or TTL, I2C, GPIO, IR, SPK, TF | 2 USB and one fixed-level serial port |
| Power and environment | 12V DC input with 100mV ripple, 300mA typical board draw, 3.3V 800mA plus 5V 2A plus 12V 2A peripheral budget | 5V only input with no documented peripheral budget |
| Operating temperature | -20C to 70C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-05 (infrared touch all-in-one for interactive kiosks) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Germany importers sourcing the X9 family, the WF-X9-05-A variant is the typical configuration for the interactive kiosk rollout use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing X9 Android Motherboards for Germany Buyers
Then there is the content layer. In Germany the publishing software the operator already runs has to work on day one, which means the playback modes, the scheduled power cycle and the remote update path have to be right before the first screen is installed.
AndroidSBC answers the panel matching problem with a documented jumper map. Each X9 lot ships with the panel voltage selection, the pin-one orientation note and the backlight current limit for the Dortmund panel model, and the BNetzA file records the configuration that was actually validated. The 1st release for Dortmund - 122200 units on September 24, 2026, Hamburg - Shenzhen lane - was built against the same reference image the partner qualified, so the screens went live without a re-test cycle.
Competitive Comparison: WF-X9-05 vs Competing Commercial Display Android Boards
What follows is not a spec-sheet comparison. It is the four questions a Dortmund operator asks after its first failed rollout.
- Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Dortmund integrators mount a locally sourced screen without a calibration pass.
- Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Dortmund usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Dortmund integrator to obtain.
- Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Dortmund.
Global Digital Signage and Commercial Display Market Trends
Unattended and outdoor formats are the segment where the board specification bites hardest. A screen on a street or in a factory has no staff to reset it, so the infrared touch all-in-one for interactive kiosks has to hold a watchdog, an RTC and a clean auto-recovery path after a mains dip.
- Entry playback tier: WF-X9-05 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
- Interactive mainstream tier: WF-X9-07 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
- Connected and unattended tier: WF-X9-08 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.
For Dortmund partners the commercial conclusion is that the board vendor has to be a factory. A trading company cannot hold a bill of materials across a three-year refresh.
Partner Success Story: Albion Screen Solutions (pub, hotel and estate screen integrator)
The Albion Screen Solutions case in the United Kingdom hospitality segment is a working example of how the X9 family from AndroidSBC supports Dortmund integrators. Albion Screen Solutions deployed 122200 X9 boards across 77 pub, hotel and estate sites.
- OEM relationship: AndroidSBC private-label SKU shipped with Albion Screen Solutions branding and CE / FCC / RoHS files bundled.
- Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
- Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus BNetzA conformity, all bundled into the Shenzhen source-factory shipment.
Albion Screen Solutions Hardware Programme Manager for United Kingdom Hospitality noted: Albion Screen Solutions took the X9 board because the scheduled power cycle and the auto restart survive a British summer inside a sealed enclosure, with 122200 units across the Dortmund estate.
Field Report: interactive kiosk rollout at a municipal service point
LONGGANG, September 24, 2026 - Deng Hui, AndroidSBC field desk. Thermal behaviour was the last gate: the WF-X9-05 finished the burn-in at the top of the -20C to 70C window rather than at 25C, which is the condition a sealed enclosure actually presents. The WF-X9-05 X9 Android motherboard order for Dortmund, Germany cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.
The WF-X9-05 infrared touch all-in-one for interactive kiosks production lot includes the WF-X9-05-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For Germany integrators, the BNetzA conformity plus CE marking with BNetzA radio interface registration and the GS mark paperwork is bundled.
Filed by Deng Hui, AndroidSBC field desk, LONGGANG. German integrators expect a GS mark safety file and German content templates, and they audit the standby current figure against the building energy plan.
WF-X9-05 Application Scenarios
The WF-X9-05 infrared touch all-in-one for interactive kiosks sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-05-A configuration is the typical build for the interactive kiosk rollout use case, with panel driver, touch HID configuration and staged OTA management bundled.
- Advertising machine and digital signage: the WF-X9-05 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
- Interactive query and wayfinding: the WF-X9-09 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
- Smart retail terminal and vending: the WF-X9-10 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
- Parcel locker and fresh food cabinet: the WF-X9-11 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
- Face recognition access control: the WF-X9-12 takes the camera input and the door controller wiring on the same board.
- Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
- Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
- Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
- Retrofit programmes in Dortmund: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.
Partnership Models for Dortmund Buyers
For Dortmund and Germany buyers the question is rarely which board, it is which relationship. Three tracks cover the answers.
- Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.
Entry to any of the three tracks starts with a sample batch and a panel validation run, and Germany partners usually convert within one quarter.
Frequently Asked Questions
Does the X9 Android motherboard family support an infrared touch all-in-one for interactive kiosks?
Answer: It is. The X9 family was specified around infrared touch all-in-one for interactive kiosks, and every board in the family is validated on that use case before it leaves the Longgang factory.
Which configurations are available in the X9 family for Germany buyers?
Answer: The X9 family spans 1GB plus 8GB, 2GB plus 16GB and 2GB plus 32GB memory and storage combinations, single or dual LVDS and MIPI DSI panel output, and resistive, capacitive, infrared or optical touch. For Germany buyers the choice is driven by panel availability and by whether the site needs 4G.
Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?
Answer: Yes - that is the standard screen configuration. The panel runs on LVDS or MIPI, the touch frame on I2C or USB, and the printer on RS232 or USB, all validated together before the lot ships.
What is the minimum order quantity and the sample lead time for Germany?
Answer: AndroidSBC takes single-board sample orders with a 1-3 day lead, then a 15-30 day mass-production lead on bulk orders. The MOQ for private-label work is agreed per SKU.
Is custom ROM, boot logo or pre-installed app development available?
Answer: AndroidSBC supports custom Android AOSP builds, Linux BSP porting, boot logo and animation work, pre-installed apps and custom UI, and locks the result as the production image.
How are firmware updates delivered to a Germany screen estate after deployment?
Answer: AndroidSBC ships staged OTA with rollback as a bundled tool, so a Germany estate of several hundred screens can be updated in waves rather than all at once.
What shipping terms does AndroidSBC support for Germany orders?
Answer: AndroidSBC supports FOB Shenzhen, CIF and EXW pricing, and books the shipping lane against a production slot so the Dortmund delivery date holds.
What happens if a board fails in the field in Germany?
Answer: Each board carries a serial number logged against its burn-in record, so a field failure in Germany is traced to its production lot, and the replacement ships from the same frozen bill of materials.
Contact AndroidSBC: Start Your WF-X9-05 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the X9 Android motherboard family. Dortmund integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For Dortmund and Germany the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.
